[ICOM] ic 775dsp Rear Stand

[elan paim]

Hello Gus 
  many thanks for this info i look again .

Augie Hansen <augie.hansen at comcast.net> wrote:
  Hi Elan
> ...
> can any one let me know where is the can you please let me know where is the Rear stand [like the rack handles but the back one ] is going to i cant see to where it go 
> i look on the manual but no info at all . 2nd are the screws for this stand are the same as the cover screws?
> 

The screws need to be about 1/8" longer than the cover screws to 
accommodate the thickness of the rear rack stand material. The ends of 
the long straight sections are attached to the upper rear corners of the 
radio and the ends of the shorter sections of the stands are attached to 
the extra threaded holes underneath the rear apron.

73,
Gus Hansen
KB0YH

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/



vy73 
and all the best 
Elan g0uut