[ICOM] Icom T90A wall charger question

[John Geiger]

Thanks Jim,

So I am assuming that any 12 volt 200mah wall charger should work. That is
interesting since the manual recommends using the special CP19 cord when
running the radio off of a cigarette lighter, and that is supposed to lower
it to 11.5 volts.

73s John AA5JG

----- Original Message ----- 
From: "Jim Walker" <jim at walkersdomain.com>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Saturday, June 30, 2007 2:00 AM
Subject: RE: [ICOM] Icom T90A wall charger question


John,

Just happened to have one right here on my desk.

Its rating for output is 12 VDC at 200ma.


Jim
KBØX

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of John Geiger
Sent: Friday, June 29, 2007 8:57 PM
To: Icom-IC-T90 at yahoogroups.com; ICOM Reflector
Subject: [ICOM] Icom T90A wall charger question

Can someone who has a T90A look at the wall charger and tell me the voltage
and current ratings for it.  It is listed in the manual as a BC110AR, but
the specifications are not given for it.

73s John AA5JG
(ex: W5TD, NE0P, N0EEN, KA0IFG)
Confirmed 6M addict: 6M WAS #1275, 6m VUCC #1260



----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/


----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/