[ICOM] IC-735 & AT-150

[Gary Fiber]

Icom never published a schematic for the ACC cable but it pretty simple 
wirine. I looked at both the IC-735 and AT-150 Manuals.

Using ACC 2 on the 735 here is the wiring

735 ACC 2                   AT-150
Pin 1 - 8V                      Pin 1 - 8V
Pin 2 - GND                  Pin 2 - GND      
Pin 4 - Band                   Pin 5 - Band
Pin 7 - 13.8 V                Pin 7 - 13.8V

Pins 3,5&6 are not used on the AT-150. Both the AT-150 accessory sockets 
are wired in parallel

Gary K8IZ
 
AI4WM wrote:
> Dose any one know where I can download a schematic of the interconnect
> cables needed to connect my IC-735 to my AT-150?
> TNX
>