[ICOM] FREE FREE FREE, Classis Icom Parts (I think!)

[Gareth Gammon]

I'd rather not say on the list. I suspect the individual has a great deal of 
business and the job of troubleshooting repairing an old radio was going 
take too much time and there were other easier repairs mounting up. I guess 
it just got being pushed further onto the back burner until it fell off the 
stove.

73
Gareth VE7CGG
----- Original Message ----- 
From: "Renee" <Nee627 at bellsouth.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Thursday, June 21, 2007 8:19 PM
Subject: Re: [ICOM] FREE FREE FREE, Classis Icom Parts (I think!)


> I, for one, would be interested in who this repair shop is, so that I 
> could avoid it. That is, if such a person is even in business any more.
> 73,
> Renee NZ9T
>
>
> Gareth Gammon wrote:
>> Years ago I purchased a used IC-701. It didn't work, likely problem was 
>> the plated through holes etc. I sent it off to be repaired and guess 
>> what? The guy didn't fix it and I have only heard from him a couple of 
>> times over the years, each time saying he'll have a look at it.  Well, 
>> its been about 4 or 5 years now and I don't want the radio back now but I 
>> do have some parts that came with it. I have, FREE to a good home,  1. An 
>> SM2 desk microphone. It looks to be in very good condtion. I cannot 
>> guarantee  that it works because I never have had the chance to try it. 
>> 2. An IC-EX2 Marker/Extension Terminal. It generates 100 khz tones and 
>> seems to be some kind of an interface.  It is also in good condition with 
>> the protective plastic covering on the face. Likewise, I don't know if 
>> this item works.
>>
>> Because my IC-701 has disappeared and at this point I am hoping for good, 
>> I no longer need these items. They are free to the first person who 
>> speaks up for the cost of shipping from British Columbia Canada.
>>
>> 73
>>
>> Gareth VE7CGG
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/