[ICOM] Carry Handle

[ynkedragon at aol.com]

Hi Gary,

I'm not a machinist nor do I know one.  The only machine shop I knew of 
in my community recently closed.  I'll have to think about this a bit 
more.

73,  Blair k3yd


-----Original Message-----
From: Gary Nichols <kd9sv at comcast.net>
To: 'ICOM Reflector' <icom at mailman.qth.net>
Sent: Wed, 30 May 2007 10:12 am
Subject: RE: [ICOM] Carry Handle



Blair, I now have the MB-23 handle installed on my 735, however it 
requires
adding new holes and tapping those holes for the new screws.  Being a
retired machinist it was not a problem for me...it looks like it was
intended to be there all along.  Good luck if you wish to try.  
Universal
Radio has the MB-23's for $12.95 each...de gary, kd9sv

-----Original Message-----
 From: icom-bounces at mailman.qth.net 
[mailto:icom-bounces at mailman.qth.net] On
Behalf Of ynkedragon at aol.com
Sent: Friday, May 25, 2007 10:40 AM
To: icom at mailman.qth.net
Subject: Re: [ICOM] Carry Handle

If the MB-23 fits the '735 would you please post that information here.
 I'm interested in adding a carry handle to mine.

73, Blair K3YD


-----Original Message-----
From: Gary Nichols <kd9sv at comcast.net>
To: 'ICOM Reflector' <icom at mailman.qth.net>
Sent: Thu, 24 May 2007 3:28 pm
Subject: RE: [ICOM] Carry Handle



Thanks Gary, I know the MB-23 fit the 725 so I suspect it would also
fit the
735 and 746pro but not sure about the 751 as it was a little bigger
radio.
I ordered 3 of them from Universal Radio and if they don't fit will send
them back...de gary, kd9sv

-----Original Message-----
 From: icom-bounces at mailman.qth.net
[mailto:icom-bounces at mailman.qth.net] On
Behalf Of Gary P. Fiber
Sent: Thursday, May 24, 2007 5:18 PM
To: ICOM Reflector
Subject: Re: [ICOM] Carry Handle

Gary,

The MB-23 fits the IC-718 and I suspect the 746Pro too.
I don't remember an accessory carry handle for the IC-735 and forget if
the IC-751A came with one.
The MB-23 possibly could be utilized for all the radios you listed but
you may have to use some improvised mounting screws and hardware.

Gary K8IZ

Gary Nichols wrote:
> I am looking for a source of carry handles for a couple different Icom
> radios, the 735, 746pro and 751A and am not finding anything online.
Anyone
> on the reflector know of a source for these please respond off line.
>
> Thanks in advance, de gary, kd9sv
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
> .
>
>

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/


----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/


________________________________________________________________________
AOL now offers free email to everyone.  Find out more about what's free
from AOL at AOL.com.
----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/


----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/


________________________________________________________________________
AOL now offers free email to everyone.  Find out more about what's free 
from AOL at AOL.com.