[ICOM] RE: Sherwood Engineering and DSP, 706 - ClearSpeech audio DSP

[Alan Leith]

And I am using a much older DSP-9+ with my IC-761.  It works just fine and
one day I might do the upgrade recommended to me by the TimeWave guys at
Dayton last year.

73

Al, VE1AL
_____________ 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Larry Winslow
Sent: Thursday, June 07, 2007 8:38 PM
To: ICOM Reflector
Subject: Re: [ICOM] RE: Sherwood Engineering and DSP, 706 - ClearSpeech
audio DSP

I've been using TimeWave DSP units for about 10 years now. I presently have
a 599zx which works great with my 765. What the rig won't handle, the 599zx
does.

I highly recommend it.

73 - Larry WØNFU
larry_w at comcast.net

At 02:39 PM 6/7/2007, you wrote:

>I use the GAP DSP unit in my audio line from the TS530 and /or the 
>IC735. I have been very satisfied with its performance. It has allowed 
>contacts where the noise level(sometimes up to S9) would not allow
anything.
>
>Healthfully yours,
>                           Don W4BWS
>----- Original Message -----
>From: "Tom Agoston" <agoston at us.ibm.com>
>To: <icom at mailman.qth.net>
>Sent: Thursday, June 07, 2007 2:32 PM
>Subject: [ICOM] RE: Sherwood Engineering and DSP,706 - ClearSpeech 
>audio DSP
>
>
> > Regarding Ron Hashiro's comment about adding the "ClearSpeech audio DSP"
>to his 706 with the SSB filter, could anyone else comment on which 
>other currently-available DSP speakers (or similar DSP solutions for HF 
>noise) might work for a 706 MKIIg?
>Is the internal  ICOM UT-106 AF-DSP  option worthwhile?    Thanks and 73
> >
>
>
>
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom 
>Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: 
>http://www.qsl.net/icom/

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/