FW: [ICOM] Re: Icom Digest, USB to CI-V Cable
Bert Almemo
balmemo at sympatico.ca
Sat Jun 2 13:12:31 EDT 2007
Hi again Ken,
I found it in the May issue. Should have looked there first. :-)) Thanks.
73 Bert, VE3OBU
-----Original Message-----
From: Bert Almemo [mailto:balmemo at sympatico.ca]
Sent: Saturday, June 02, 2007 1:07 PM
To: 'ICOM Reflector'
Subject: RE: [ICOM] Re: Icom Digest, USB to CI-V Cable
Hi Ken,
Sounds interesting. Have looked through the QST June issue but can't find
it. Please advise. Thanks.
73 Bert, VE3OBU
-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Ken
Sent: Saturday, June 02, 2007 6:40 AM
To: icom at mailman.qth.net
Subject: [ICOM] Re: Icom Digest, USB to CI-V Cable
Hi Folks, if you're looking for a USB to CI-V cable try the homebrew one in
the latest QST magazine. A handful of parts and you're good to go. Ken
--- icom-request at mailman.qth.net wrote:
> Send Icom mailing list submissions to
> icom at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/icom
> or, via email, send a message with subject or body 'help'
> to
> icom-request at mailman.qth.net
>
> You can reach the person managing the list at
> icom-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Icom digest..."
> > Today's Topics:
>
> 1. Radio Shack 20-049 Programming Cable
> (jpk5lad at cox.net)
> 2. Re: Radio Shack 20-049 Programming Cable (Gary)
> 3. Re: Radio Shack 20-049 Programming Cable
> (jpk5lad at cox.net)
> 4. OPC1529 (Ed K1EP)
> 5. Re: [-] [ICOM] Radio Shack 20-049 Programming Cable
> (Paul Playford)
> 6. Re: Radio Shack 20-049 Programming Cable (D C *Mac*
> Macdonald)
> 7. Re: [-] [ICOM] Radio Shack 20-049 Programming Cable (Tom
> Crawford)
> 8. Re: [-] [ICOM] Radio Shack 20-049 Programming Cable
> (dave)
> 9. Re: [-] [ICOM] Radio Shack 20-049 Programming Cable
> (jpk5lad at cox.net)
> 10. RE: Radio Shack 20-049 Programming Cable (AD5PE)
> > From: <jpk5lad at cox.net>
> Subject: [ICOM] Radio Shack 20-049 Programming Cable
> CC:
> Date: Fri, 1 Jun 2007 16:27:44 -0700
> To: ICOM Reflector <icom at mailman.qth.net>
>
> Mac - K2GKK/5 suggested I upload the 20-249 schematic to my web site
> so here 'tis:
>
>
http://www.hayseed.net/~jpk5lad/download/Radio%20Shack%2020-049%20cable.JPG
> or if it splits the URL try:
>
> http://tinyurl.com/3xg5zo
>
> 73,
> Jim - K5LAD
> > --
> > ===========================
> > http://www.hayseed.net/~jpk5lad/
>
>
> > ----- Original Message -----
> > From: <jpk5lad at cox.net>
> > To: "ICOM Reflector" <icom at mailman.qth.net>
> > Sent: Friday, June 01, 2007 6:57 PM
> > Subject: [ICOM] Radio Shack 20-049 Programming Cable
> >
> >
> > This cable, 20-049, is for some of their scanners and
> I've not been able to
> > use it for any CI-V applications. Several weeks ago I
> "wrung out" the
> > schematic of the 20-049 and I've offered it via private
> email to several
> > members on the reflector but I haven't heard back from
> any of them. I
> > thought this might be helpful but evidently nobody
> wants or needs it.
> > Anyway, I do have a schematic of only the RS 20-049
> cable if somebody does
> > need it.
> >
> > 73,
> > Jim - K5LAD
> >
> > --
> > ===========================
> > http://www.hayseed.net/~jpk5lad/
> >
>
>
> > From: Gary <n6lrv at cox.net>
> Subject: Re: [ICOM] Radio Shack 20-049 Programming Cable
> Date: Fri, 01 Jun 2007 16:52:19 -0700
> To: ICOM Reflector <icom at mailman.qth.net>
>
> Jim,
> Your schematic is a bit odd. Did you actually cut open your cable to
> come up with the conductor colors and the shield connection?
> Connecting the shield to pin 2 (data
> receive) of the serial connector is very unusual. Usually the shield
> would be connected to pin 5 (ground). I rung out mine without cutting
> the molded cable open and found that the cable appears to be straight
> through with only data transmit (serial pin 3) passing all the way
> through to the phone plug along with serial pin 5 (ground).
> As shown in your drawing there appear to be no flow control jumpers on
> the serial side. I don't see how this could be used for any Icom
> application at this time.
> Gary
>
> jpk5lad at cox.net wrote:
>
> > Mac - K2GKK/5 suggested I upload the 20-249 schematic
> to my web site so here 'tis:
> >
> >
>
http://www.hayseed.net/~jpk5lad/download/Radio%20Shack%2020-049%20cable.JPG
> > or if it splits the URL try:
> >
> > http://tinyurl.com/3xg5zo
> >
> > 73,
> > Jim - K5LAD
> > > --
> > > ===========================
> > > http://www.hayseed.net/~jpk5lad/
> >
> > > ----- Original Message -----
> > > From: <jpk5lad at cox.net>
> > > To: "ICOM Reflector" <icom at mailman.qth.net>
> > > Sent: Friday, June 01, 2007 6:57 PM
> > > Subject: [ICOM] Radio Shack 20-049 Programming Cable
> > >
> > >
> > > This cable, 20-049, is for some of their scanners and
> I've not been able to
> > > use it for any CI-V applications. Several weeks ago
> I "wrung out" the
> > > schematic of the 20-049 and I've offered it via
> private email to several
> > > members on the reflector but I haven't heard back
> from any of them. I
> > > thought this might be helpful but evidently nobody
> wants or needs it.
> > > Anyway, I do have a schematic of only the RS 20-049
> cable if somebody does
> > > need it.
> > >
> > > 73,
> > > Jim - K5LAD
> > >
> > > --
> > > ===========================
> > > http://www.hayseed.net/~jpk5lad/
> > >
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ:
> > http://www.qsl.net/icom/
>
>
> > From: <jpk5lad at cox.net>
> Subject: Re: [ICOM] Radio Shack 20-049 Programming Cable
> CC:
> Date: Fri, 1 Jun 2007 17:07:52 -0700
> To: ICOM Reflector <icom at mailman.qth.net>
>
> Hi Gary --
> I couldn't agree with you more but that's the way mine was set up. It
> certainly didn't make any sense to me either. I removed about a 1/2"
> piece of outer covering to gain access to the wires and used phono
> needle probes to get to the wires inside.
> (Gosh, I wonder how many people now-a-days actually know what a phono
> needle really is?)
>
> Once I saw how mine was wired I knew I was out out luck using it as a
> CI-V interface device.
>
> Perhaps I had a cable constructed by someone anxious to go on their
> coffee break, or saki break.......... or some kind of break.
>
> Jim - K5LAD
>
>
> ---- Gary <n6lrv at cox.net> wrote:
> > Jim,
> > Your schematic is a bit odd. Did you actually cut open
> your cable to come up with the
> > conductor colors and the shield connection? Connecting
> the shield to pin 2 (data
> > receive) of the serial connector is very unusual.
> Usually the shield would be
> > connected to pin 5 (ground). I rung out mine without
> cutting the molded cable open and
> > found that the cable appears to be straight through
> with only data transmit (serial
> > pin 3) passing all the way through to the phone plug
> along with serial pin 5 (ground).
> > As shown in your drawing there appear to be no flow
> control jumpers on the serial
> > side. I don't see how this could be used for any Icom
> application at this time.
> > Gary
> >
> > jpk5lad at cox.net wrote:
> >
> > > Mac - K2GKK/5 suggested I upload the 20-249 schematic
> to my web site so here 'tis:
> > >
> > >
>
http://www.hayseed.net/~jpk5lad/download/Radio%20Shack%2020-049%20cable.JPG
> > > or if it splits the URL try:
> > >
> > > http://tinyurl.com/3xg5zo
> > >
> > > 73,
> > > Jim - K5LAD
> > > > --
> > > > ===========================
> > > > http://www.hayseed.net/~jpk5lad/
> > >
> > > > ----- Original Message -----
> > > > From: <jpk5lad at cox.net>
> > > > To: "ICOM Reflector" <icom at mailman.qth.net>
> > > > Sent: Friday, June 01, 2007 6:57 PM
> > > > Subject: [ICOM] Radio Shack 20-049 Programming
> Cable
> > > >
> > > >
> > > > This cable, 20-049, is for some of their scanners
> and I've not been able to
> > > > use it for any CI-V applications. Several weeks
> ago I "wrung out" the
> > > > schematic of the 20-049 and I've offered it via
> private email to several
> > > > members on the reflector but I haven't heard back
> from any of them. I
> > > > thought this might be helpful but evidently nobody
> wants or needs it.
> > > > Anyway, I do have a schematic of only the RS 20-049
> cable if somebody does
> > > > need it.
> > > >
> > > > 73,
> > > > Jim - K5LAD
> > > >
> > > > --
> > > > ===========================
> > > > http://www.hayseed.net/~jpk5lad/
> > > >
> > >
> > > ----
> > > Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net
> > > Icom Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ:
> > > http://www.qsl.net/icom/
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ:
> > http://www.qsl.net/icom/
>
> --
> ===========================
> http://www.hayseed.net/~jpk5lad/
>
>
> > From: Ed K1EP <k1ep.list at gmail.com>
> Subject: [ICOM] OPC1529
> Date: Fri, 01 Jun 2007 20:44:05 -0400
> To: icom at mailman.qth.net
>
> Does anyone know what the schematic for an OPC1529 is?
> Is it a straight cable, i.e. no level translation, or is it similar to
> a CJ-V device with some level translation?
>
>
> > From: "Paul Playford" <paul at w8aef.com>
> Subject: Re: [-] [ICOM] Radio Shack 20-049 Programming Cable
> Date: Sat, 2 Jun 2007 01:21:40 -0000
> To: "ICOM Reflector" <icom at mailman.qth.net>
>
> I would like that schematic. Please send it to me at paul at w8aef.com
>
> de Paul, W8AEF
>
> ----- Original Message -----
> From: <jpk5lad at cox.net>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Friday, June 01, 2007 22:57
> Subject: [-] [ICOM] Radio Shack 20-049 Programming Cable
>
>
> This cable, 20-049, is for some of their scanners and I've not been
> able to use it for any CI-V applications. Several weeks ago I "wrung
> out" the schematic of the 20-049 and I've offered it via private email
> to several members on the reflector but I haven't heard back from any
> of them. I thought this might be helpful but evidently nobody wants
> or needs it.
> Anyway, I do have a schematic of only the RS 20-049 cable if somebody
> does need it.
>
> 73,
> Jim - K5LAD
>
> --
> ===========================
> http://www.hayseed.net/~jpk5lad/
>
>
> > From: "D C *Mac* Macdonald" <k2gkk at hotmail.com>
> Subject: Re: [ICOM] Radio Shack 20-049 Programming Cable
> Date: Fri, 01 Jun 2007 20:28:39 -0500
> To: icom at mailman.qth.net
>
> Jim, K5LAD, has already stated that he has now posted the schematic at
> his website. I would respectfully suggest folks go there to get it.
>
> 73 - Mac, K2GKK/5
> Oklahoma City, OK
>
>
>
> > From: "Tom Crawford" <TMCsail at sbcglobal.net>
> Subject: Re: [-] [ICOM] Radio Shack 20-049 Programming Cable
> Date: Fri, 1 Jun 2007 21:37:25 -0400
> To: "ICOM Reflector" <icom at mailman.qth.net>
>
> Do not chase the wild goose! - HI
> It's sure easy for these things to take on a life of their own!!
>
> This is my input:
> 20-049 has no purpose as an ICOM control cable.
>
>
> 20-289 RS-232 to CIV
> LOOKS like the above (20-049) but has circuitry in the
> RS-232 housing the
> take care of the conversion to CIV level.
> I have used it and it works with my 746pro and 706. This cable is on
> close-out also and if you can find it, is only a couple of bucks.
>
> 20-047 USB to CIV
> This cable plugs into a USB port. It comes with a driver (which can
> also be download from Radio Shack web site) and works FB on both my
> rigs (as mentioned above).
>
> Take care and 73,
> Tom, W3TMC
>
>
> > From: dave <wpaper at sbcglobal.net>
> Subject: Re: [-] [ICOM] Radio Shack 20-049 Programming Cable
> Date: Fri, 01 Jun 2007 21:55:56 -0500
> To: ICOM Reflector <icom at mailman.qth.net>
>
> Has anyone tried this as a programming cable for the ICOM VHF/UHF
> radio line?
>
> It appears to be the same as the ICOM cable I have for programming my
> IC 2720H (3) and T90 (2) radios. Programming for the VHF/UHF radios is
> not CI-V dependent.. The Radio Shack cable is quite a bit less
> expensive than the Icom cable. Well worth the investment IF it works
> in that application.
>
> Dave, W5WP
>
>
> >
>
> > From: <jpk5lad at cox.net>
> Subject: Re: [-] [ICOM] Radio Shack 20-049 Programming Cable
> CC:
> Date: Fri, 1 Jun 2007 20:24:01 -0700
> To: ICOM Reflector <icom at mailman.qth.net>
>
> Hi Paul --
>
>
http://www.hayseed.net/~jpk5lad/download/Radio%20Shack%2020-049%20cable.JPG
>
> or if it splits the URL try:
>
> http://tinyurl.com/3xg5zo
>
> 73,
> Jim - K5LAD
> --
> ===========================
> http://www.hayseed.net/~jpk5lad/
>
>
> ---- Paul Playford <paul at w8aef.com> wrote:
> > I would like that schematic. Please send it to me at
> paul at w8aef.com
> >
> > de Paul, W8AEF
> >
> > ----- Original Message -----
> > From: <jpk5lad at cox.net>
> > To: "ICOM Reflector" <icom at mailman.qth.net>
> > Sent: Friday, June 01, 2007 22:57
> > Subject: [-] [ICOM] Radio Shack 20-049 Programming
> Cable
> >
> >
> > This cable, 20-049, is for some of their scanners and
> I've not been able to
> > use it for any CI-V applications. Several weeks ago I
> "wrung out" the
> > schematic of the 20-049 and I've offered it via private
> email to several
> > members on the reflector but I haven't heard back from
> any of them. I
> > thought this might be helpful but evidently nobody
> wants or needs it.
> > Anyway, I do have a schematic of only the RS 20-049
> cable if somebody does
> > need it.
> >
> > 73,
> > Jim - K5LAD
> >
> > --
> > ===========================
> > http://www.hayseed.net/~jpk5lad/
>
>
> > From: "AD5PE" <ad5pe at sbcglobal.net>
> Subject: RE: [ICOM] Radio Shack 20-049 Programming Cable
> Date: Fri, 1 Jun 2007 23:01:16 -0500
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
>
> It's a TTL converter, but of an inferior design. Go to
> www.starrsoft.com and look for the link to "cables" - links to several
> commercials, a couple of good home brew designs, and a detailed
> explanation of why this one sometimes doesn't work (hint - whoever
> designed it made some assumptions about comm port voltage levels that
> are common (on
> desktops) but not
> "standard" (so it won't work with most laptops, some desktops and the
> vast majority of USB-serial converters.
>
> Jay
> AD5PE
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net
> [mailto:icom-bounces at mailman.qth.net] On Behalf Of k0bx at arrl.net
> Sent: Friday, June 01, 2007 16:51
> To: ICOM Reflector
> Subject: [ICOM] Radio Shack 20-049 Programming Cable
>
> I went over to RS and bought the last one that had. I hooked it up to
> my IC-756PRO3. But it didn't work??
>
> I wonder if this is a RS-232 to TTL converter? IT seems like it is a
> straight cable.
>
> I also need to know if I need a adapter to go from stereo to 2 pin
> mono??
>
> Yes the comport is working. I have another cable that works fine in
> the same port to the same rig.
>
> Joe K0BX
>
>
> --- AA6DX - Mark <aa6dx at arrl.net> wrote:
>
> > Howdy group.. we've had chats on the reflector here
> about the RS
> > cable, 1/8"
> > mono to serial, for programming scanners and... for
> ICOM users ... a
> > way to connect your CAT rcvr/xcvr to your computer.
> > Anyway, I have ONE somewhere
> > in my stuff ... it works swell ... but I misplaced it
> and was looking
> > for to buy one of these on close-out at local Radio
> Shacks.
> > Closest one that one
> > in stock was in Fortuna, a 50+ mile round trip from
> > my QTH. Was there
> > today, went in and the young man immediately went to
> the rack and
> > handed me on, the yellow sale tag said $1.97 -- so ...
> I said, "are
> > there any more?"
> > and he said, why yes, here's 2 more! So I took them
> > all. "BUT WAIT" --
> > Here's the kicker ... at checkout, it turns out that RS
> has, thru June
> > 3rd, an additional 30% off Yellow Tag items .. so .. my
> cost, each ..
> > $1.38!
> > Even with CA sales tax, my total was $4.44 FOR ALL
> > THREE! Me be happy --
> > best get on RS site and put your zip code and see if
> you can get
> > before they are all gone! The 3 RS stores local were
> plumb out.
> > I have 3 or 4 scanners
> > that use the same cable, too, as well as 2M /
> > Duobander handhelds. Here's
> > URL for the item ...
> > http://tinyurl.com/3c5ct5
> > Let us know if you find some!
> >
> > 73
> > Mark Nelson - AA6DX
> >
> > AA6DX at ARRL.NET
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC,
> > icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ:
> > http://www.qsl.net/icom/
> >
>
>
> Stop the insanity!
> Please do not add me to any distribution lists (Joke, Stories or Junk)
> without my permission.
> ----
> Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net Icom Users
> Net: Sundays, 1700Z, 14.316 MHz Icom FAQ:
> http://www.qsl.net/icom/
>
>
> > _______________________________________________
> Icom mailing list
> Icom at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/icom
>
____________________________________________________________________________
________
Moody friends. Drama queens. Your life? Nope! - their life, your story. Play
Sims Stories at Yahoo! Games.
http://sims.yahoo.com/
----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.472 / Virus Database: 269.8.6/828 - Release Date: 6/1/2007
11:22 AM
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.472 / Virus Database: 269.8.6/828 - Release Date: 6/1/2007
11:22 AM
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.472 / Virus Database: 269.8.6/828 - Release Date: 6/1/2007
11:22 AM
More information about the Icom
mailing list