[ICOM] 706MKIIG

[John Geiger]

Makes sense in a way.  Why should I have to go thru the RTTY or AM
selections if I never run those modes?  Makes it a little more efficient in
getting thru the modes with the single button.  I think there are a couple
of rigs out now that allow you to select which bands you have to have
available.

73s John AA5JG

----- Original Message ----- 
From: "Gary P. Fiber" <gfiber at clearwire.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Tuesday, July 31, 2007 2:23 PM
Subject: Re: [ICOM] 706MKIIG


> Good...I never did figure out why Icom gave us the ability to disable
> operation modes, but you can in the 706MKIIG so far as I remember.
> That feature did not come up to bite us too often which was good.
>
> Gary K8IZ
>
> Paul Gates, KD3JF wrote:
> > Gary, your suggestion worked!! The directions are on page
> > 15 of the manual and what you do is push both band up and
> > down buttons and turn the radio on.
> >
> > Thanks a lot for your help... Can't figure out what I did
> > to get it not working properly!
> >
> > Paul, KD3JF
> > --- Gary Fiber <gfiber at clearwire.net> wrote:
> >
> >
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>