[ICOM] 706MKIIG

[Paul Gates, KD3JF]

Gary, your suggestion worked!! The directions are on page
15 of the manual and what you do is push both band up and
down buttons and turn the radio on.

Thanks a lot for your help... Can't figure out what I did
to get it not working properly!

Paul, KD3JF
--- Gary Fiber <gfiber at clearwire.net> wrote:

> Paul,
> 
> I don't have the manual with me but there was a way to
> turn off modes in 
> that rig I seem to remember maybe you did that. How to do
> that is in the 
> manual someplace, I don't have one downloaded here or i
> would tell you 
> where.
> 
> Does the LSB/USB show up in the 75/80 band? If so then I
> would do a full 
> reset of the CPU.
> 
> Gary K8IZ
> 
> Paul Gates, KD3JF wrote:
> > I have a problem. Cannot get the rig to go to LSB/USB
> using
> > the mode
> >  switch. 75/80 works properly but the other bands do
> not.
> > It starts
> >  off with CW, Rtty, FM, etc but will not go to LSB or
> USB.
> > Any
> >  suggestions would be appreciated.
> > ----
> > Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
> >
> >
> >   
> 
> ----
> Your Moderator: Dick Flanagan K7VC,
> icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>