[ICOM] IC-208H Mounting Bracket and mike extension cord

[Mike - 2007]

I use Aluminum angle stock to make my mounting brackets.  With a little
imagination you can cut several pieces, make the gymbal mount, and you are
done.

For the mic extension, I use a standard RJ-45 network cable.  You can roll
your own or buy one with a F-F adapter.  They are normally in 3 - 6 - 10 ft
lengths.

Good luck.

Mike - KD9KC.
M.A.R.I.E.
El Paso, Tx. 
www.w5dpd.org

=============================================
The United States Constitution (c) 1791. All Rights reserved.
=============================================


 

> -----Original Message-----
> From: icom-bounces at mailman.qth.net 
> [mailto:icom-bounces at mailman.qth.net] On Behalf Of N9KO
> Sent: Saturday, July 28, 2007 12:16 AM
> To: icom at mailman.qth.net
> Subject: [ICOM] IC-208H Mounting Bracket and mike extension cord
> 
> I  just got a 208H and looks like I need the MB 58 mounting 
> bracket for the remote head, and the OPC-440 mike extension 
> cord.  Has anyone identified any alternatives to the pricey 
> Icom accessories?
> Tnx
> Calvin
> N9KO
> ----
> Your Moderator: Dick Flanagan K7VC, 
> icom-owner at mailman.qth.net Icom Users Net: Sundays, 1700Z, 
> 14.316 MHz Icom FAQ: http://www.qsl.net/icom/