[ICOM] HM-133 -- junko microphone?

[Mike - KD9KC]

I have used an HM-14 on a 706 MK-I.  It worked fine, once the proper
connector was crimped on.

Mike - KD9KC.
M.A.R.I.E.
El Paso, Tx. 

www.w5dpd.org
 

> -----Original Message-----
> From: icom-bounces at mailman.qth.net 
> [mailto:icom-bounces at mailman.qth.net] On Behalf Of Jim Vaughan
> Sent: Tuesday, January 30, 2007 3:49 PM
> To: ICOM Reflector
> Subject: Re: [ICOM] HM-133 -- junko microphone?
> 
> Hi Steve (N8TFD),
> 
> I have two IC-2720 rigs with the HM-133 mic and I don't have 
> a problem at all.
> In fact I was going to ask is the HM-133 will work with the 
> IC-706MKIIG.
> I don't care for the HM-103 that is supplied with the IC-706MKIIG.
> Has  anyone ever used the HM-133 mic with the IC-706MKIIG?
> 
> 73 and Thanks,
> Jim, K4TXJ
> Louisville, Ky.
> ______________________________________________________________
> __________________________________
> 
> ----- Original Message -----
> From: "Mike" <nf4l at nf4l.com>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Tuesday, January 30, 2007 9:01 AM
> Subject: Re: [ICOM] HM-133 -- junko microphone?
> 
> 
> > Steve Lewis wrote:
> >> I'm having issues with my HM-133 mic (default mic for the IC-2720).
> >> It's NOT the radio, my HM-90A and bare bones HM-95 work fine!
> >>
> >> Basically, I have to squeeze the mic in a death grip to 
> acquire "PTT".
> >> There's an audible "click" without doing that, but I guess 
> the switch is
> >> not fully "depressed"...
> >>
> >> I've taken the mic apart, there's no obvious mechanical flaw -- and
> >> using a small blunt object I can "force" the switch far 
> enough to create
> >> "PTT".  The switch is NOT becoming desoldered from the PC board, or
> >> anything like that.
> >>
> >> Has anyone else had this issue?
> >>
> >> Anyway -- seems like I have to replace the mic, probably 
> with another
> >> model.  Any suggestions?
> >>
> >> -73- de N8TFD/Steve
> > I had a mic like that, and was able to fashion a shim (a 
> slice of pink 
> > eraser) to put between the mic button and the switch.
> > Mike NF4L
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
> >
> > -- 
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.5.432 / Virus Database: 268.17.15/659 - Release 
> Date: 1/30/2007 
> > 9:31 AM
> >
> > 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/