[ICOM] IC-756 PROII 6-Meter Oscillation Problem

[Trevor Pitman]

Hello Frank
I have a 756Proii with the same problem. The local agent advised the 
following:
"Factory suggested having sealed case around the TX mixer D771, L771 and 
L772.

The part for the sealed case is "8510012400  2177 D/A CASE"."

I only received the part yesterday, and since then have had to return the 
radio to the agent to have the display replaced. I will send the part back 
to them and get them to fit it so I can't as yet advise on it's 
effectiveness.

Good luck

Trevor

VK3VG

----- Original Message ----- 
From: "Frank A. Ellis" <w3uhf at yahoo.com>
To: "ICOM List" <icom at mailman.qth.net>
Sent: Tuesday, January 16, 2007 1:05 PM
Subject: [ICOM] IC-756 PROII 6-Meter Oscillation Problem


> Hi All,
>
> My 756 PROII has developed the dreaded 6-meter
> oscillation problem. Checked ICOM America's Knowledge
> Base and found no matches (??!!) so was wondering if
> anyone here had any experience with the effectiveness
> of ICOM's fix (I believe they add an isolation diode
> in the RF feedback path, from what I have read) and
> how expensive it is to perform.
>
> Thanks,
>
> 73, Frank W3UHF
>
>
>
> ____________________________________________________________________________________
> Have a burning question?
> Go to www.Answers.yahoo.com and get answers from real people who know.
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/