[ICOM] 706mk2

[Jim Vohland]

Easiest way to tell without opening? If you have DSP and it works, then the ut106 is installed. 




----------------------------------------
> Date: Sat, 6 Jan 2007 22:27:28 -0800
> From: johngeig at yahoo.com
> Subject: Re: [ICOM] 706mk2
> To: icom at mailman.qth.net
> 
> I believe that some of the 706MKIIGs sold in other
> countries (Japan comes to mind) did not have the DSP
> module as standard.  All MKIIGs sold in the US came
> with it, I believe.
> 
> 73s John W5TD
> 
> --- Jim Miller <JimMiller at STL-OnLine.Net> wrote:
> 
> > Were some of the 706 Mk II G 's built without the
> > ut-106?
> > Can I tell if mine has it in without opening the
> > radio?
> > Is there a published serial split?
> > What does it look like and where is it?
> > What do I see if it ISN'T installed?
> > 
> > 73, Jim
> > 
> > ----- Original Message ----- 
> > From: "D C *Mac* Macdonald" <k2gkk at hotmail.com>
> > To: <icom at mailman.qth.net>
> > Sent: Saturday, January 06, 2007 10:47 AM
> > Subject: Re: [ICOM] 706mk2
> > 
> > 
> > > I finally got around to installing the UT-106 that
> > I
> > > have had almost as long as Mk II that I bought new
> > > before the DSP was included.
> > >
> > > I also installed the FL-232 (350 Hz CW) and FL-223
> > > (1.9 kHz SSB) filters.  What an improvement!!!
> > >
> > > Somewhere around here, I also have the speech unit
> > > to install.
> > >
> > > Mac - K2GKK
> > > Oklahoma City, OK
> > >
> > >
> > > ----Original Message Follows----
> > > From: Gary Fiber <gfiber at clearwire.net>
> > > Subject: Re: [ICOM] 706mk2
> > > Date: Sat, 06 Jan 2007 08:35:38 -0800
> > >
> > > The UT-106 installs into an IC-706MKII, I have one
> > with a
> > > UT-106 installed.  After a while it was included
> > as standard
> > > into the rig.
> > >
> > > The IC-706MKIIG had the UT-106 installed from the
> > factory
> > >
> > > The UT-106 Will NOT install in the original IC-706
> > however.
> > >
> > > Gary K8IZ
> > >
> > >
> > > [ José=LU1ARV ] wrote:
> > > >Hi Hi!  For what I see in the manual, the UT-106,
> > it is not possible to
> > > >install it in the IC-706MKII.   Is it correct? I
> > don't want to open my
> > > >"new" rig.
> > > >Thank you!
> > > >José/73
> > >
> > >
> > > ----
> > > Your Moderator: Dick Flanagan K7VC,
> > icom-owner at mailman.qth.net
> > > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > > Icom FAQ: http://www.qsl.net/icom/
> > >
> > 
> > ----
> > Your Moderator: Dick Flanagan K7VC,
> > icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/

_________________________________________________________________
Get the Live.com Holiday Page for recipes, gift-giving ideas, and more.
www.live.com/?addtemplate=holiday