[ICOM] IC746[not pro] & SB220 with Ampkeyer

[Dave Edwards]

That's the way to go John...I did the same thing and then put it inside one 
of those small blue Rat Shack project boxes. The RCA connectors and RCA 
cables cost me more than the rest of the project.  I could not find a 12 
volt wall-wort....a 9 volt one works fine.  Amp keyer?? its a relay in a 
box!!
...Dave
----- Original Message ----- 
From: "John Luthy" <jluthy1 at verizon.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Tuesday, January 02, 2007 7:54 PM
Subject: Re: [ICOM] IC746[not pro] & SB220 with Ampkeyer


> Bob,
>
> I use a IC-746  and a SB220.  I use a 12v relay I had laying around
> and a old 12v wall-wort to power it.
>
> It looks ugly but it works just fine, and as the whole thing is in a
> pile behind the equipment I don't care what it loks like.
>
> Well good luck ,
>
> John
> N7JL
>
> I just deleted some smarty pants comments about the code requirments
> but decided that Dick has better things to do than to tell us to stay
> on topic. ;-)
>
>
> ----- Original Message ----- 
> From: <Greenacres113 at aol.com>
> To: <icom at mailman.qth.net>
> Sent: Tuesday, January 02, 2007 11:42 AM
> Subject: [ICOM] IC746[not pro] & SB220 with Ampkeyer
>
>
>> I am interested to see if anyone is  using this combo with an
> Ampkeyer or
>> similiar system. I have just not gotten  around to hooking them up.I
> would like
>> to converse with someone using this  setup.I  would like to compare
> notes &
>> probably  get  advice.
>>
>> bob k9il
>> ----
>> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/