[ICOM] IC-7000 Software

[Frost, Charles]

Dave is aware of that part I would like to have a program to do the
repeaters with. 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] 
Sent: Thursday, February 15, 2007 8:35 AM
To: ICOM Reflector
Subject: Re: [ICOM] IC-7000 Software

I'm confused - the IC-7000 isn't dependant on a computer to operate.
What atre you really trying to say and ask, Dave?

73

David N1EA

On 2/15/07, Frost, Charles <Charles.Frost at aliefisd.net> wrote:
> Lots of luck OM
>
> Frosty
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
> Sent: Wednesday, February 14, 2007 1:43 PM
> To: ICOM Reflector
> Subject: [ICOM] IC-7000 Software
>
> I apologize in advance if this subject has been covered.
>
> I acquired an IC-7000 yesterday and wonder if anyone out there has found
> or developed programming software for this radio. If so, recommendations
> based on user experience would be appreciated.
>
> The software needs to not only control the transceiver, which is of
> secondary importance, but to also program the radio itself so that it is
> not computer dependent.
>
> TIA
>
> Dave, W5WP
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/