[ICOM] Option filter in IC-746

[William S. White]

Bert
After you "set up" the filter in the main menu #'s 4 or 5.
Set the 746 to CW or RTTY.
Press and hold the filter button. (bring up a filter menu)
Press the filter button again (you will see the -N =  narrow)
Press F2 to scroll through the installed filter options.

Also don't forget the 746 must be in CW/RTTY mode to use/select the filter.
You can use the FL-100 in SSB, just tell the 746 that the FL-223 is 
installed in the set up menu. The 746 doesn't know the difference.

Bill

----- Original Message ----- 
From: "Bert Almemo" <balmemo at sympatico.ca>
Subject: [ICOM] Option filter in IC-746


>I have a FL-100 filter, 500Hz, installed in my 746 but can't select it. I
> have gone through the process in the manual how to activate an optional
> filter but it doesn't seem to work. Help would be appreciated. Thanks.
>
> 73 Bert, VE3OBU