[ICOM] Option filter in IC-746

[Mike Brown]

Bert, on my 746, I go into the set menu, and go to number 4 for the 9 mhz-1, 
then turned the vfo until <9mhz-1>
                                                                             
                                                                             
   FL-100
showed up. Then just hit the Menu key to get out and you should be set. Or, 
you could have put the FL-100 in the other 9mhz position and just get back 
in the Set option and go to number 5, which is the other option for where 
you could have placed the  filter. When you get to it, just turn the Vfo 
until FL-100 shows, hit menu and you should be set.

73 Mike K9MI


----- Original Message ----- 
From: "Bert Almemo" <balmemo at sympatico.ca>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Sunday, February 11, 2007 04 03
Subject: [ICOM] Option filter in IC-746


>I have a FL-100 filter, 500Hz, installed in my 746 but can't select it. I
> have gone through the process in the manual how to activate an optional
> filter but it doesn't seem to work. Help would be appreciated. Thanks.
>
> 73 Bert, VE3OBU
>
>
> -- 
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.5.441 / Virus Database: 268.17.34/679 - Release Date: 2/10/2007
> 4:08 PM
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>