[ICOM] Trouble with I-765

[VE3KF]

Yes, the problem is on 28 Mc only. 765 has the switch
on the board and now one in 100 Wt position. 
VE3KF, Alex.

--- Nathan Moreschi <n4ydu at nc.rr.com> wrote:

> Mel, I don't think that is the case here because the
> problem is only on 28 
> mhz and the other bands half full output.
> 
> 73,
> 
> Nate/N4YDU
> ----- Original Message ----- 
> From: "Mel Martin" <ve2dc at videotron.ca>
> To: "'VE3KF'" <va3ttt at yahoo.com>
> Cc: <icom at mailman.qth.net>
> Sent: Friday, December 14, 2007 11:55 AM
> Subject: Re: [ICOM] Trouble with I-765
> 
> 
> > My 781 has a switch on one of the boards that cuts
> power to 50W on 10. It
> > was a license limitation in Japan (perhaps still
> is). Could there be such 
> > a
> > switch or diode in the 765? It's the same
> vintage...
> >
> >
> > --------------------
> > Mel Martin, VE2DC
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC:
> icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/ 
> 
> ----
> Your Moderator: Dick Flanagan K7VC:
> icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ