[ICOM] ICOM CK-70 Kit

[Gary P. Fiber]

Wasn't much to the Kit Walter. It was a DC power cable and the bracket 
to hold the DC plug in the slot on the back panel.

Basically you remove the radio cover, locate the DC connector. It will 
have a jumper plug installed.
Remove the external cover on the back panel. Install the slotted 
bracket. Inset the internal DC connector into it.

To operate on DC remove the jumper plug and replace it with the DC 
cable. To operate on AC remove the DC cable and insert the jumper plug.


Gary K8IZ

Walter S. Szachara wrote:
> Good morning...
>
> Would anyone on the list have a copy of the data sheet for the CK-70 
> 12 VDC kit for the R-70/R-71A they could send to me?
>
> Thanks...
>
> Regards,
>
> Walt, W2OKF
>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>