[ICOM] 756 Classic and Filters

[Jim Vohland]

I just performed this same feat on my IC746 this morning. If the 756 is the 
same, after selecting it on the set menu, you also must go to the filter 
button, hold for two seconds and then select it there also. That will then 
allow you to activate the filter via the filter button. At least it worked 
fine on my 746. I also added the fl100 cw filter and it works good also. 
Good Luck.


>From: "AD5PE" <ad5pe at sbcglobal.net>
>Reply-To: ICOM Reflector <icom at mailman.qth.net>
>To: "'ICOM Reflector'" <icom at mailman.qth.net>
>Subject: [ICOM] 756 Classic and Filters
>Date: Mon, 6 Aug 2007 21:26:28 -0500
>
>I've just installed an FL-223 (1.9 kHz in the 9MHz IF) filter in my 756
>classic.  I followed the directions in the manual, and the "set" menu shows
>FL-223 as expected, but when I go to Filters, I can't select it!  Did I 
>miss
>a step?  Is the manual wrong?  Or is there some other common cause?
>
>Thanks,
>
>Jay
>AD5PE
>
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/

_________________________________________________________________
Puzzles, trivia teasers, word scrambles and more. Play for your chance to 
win! http://club.live.com/home.aspx?icid=CLUB_hotmailtextlink