[ICOM] Any Sherlock Holmes types available? Need part number.

[Gary Fiber]

Mike,

I am not aware of a non Icom equivalent off hand. I don't think Molex 
made Icom's connectors. I also don't know what Icom is charging these 
days for the connector and pins.  I am sure some after market supplier 
has them but I wonder if those have the locking tab on them.

Gary

Mike - KD9KC wrote:
> Good evening Folks.
>
> I need a part number.  What I am searching for is the 2-pin connector that
> goes on the back of the ICOM EX-767.  It is a 2-pin polarized MOLEX type
> connector.  It is the mate to the OPC-225 power cable.
>
> A useable substitute could be J-3 on the EX-766 Logic Unit A (power
> connector), or J-4 thru 9 on the IC-900 Interface Unit B (Band unit power
> connectors).  In the IC-900 manual I find it listed as part # LR-02-2V.
>
> ICOM can't seem to come up with a cross to it.  If I do get something, I am
> going to buy about 20 of them so I never need another.
>
> While I am asking - anyone have any data either paper or PDF on the EX-767?
>
> Thanks - y-all have a great evening...
>
> Mike - KD9KC.
> M.A.R.I.E.
> El Paso, Tx. 
> www.w5dpd.org
>
> =============================================
> The United States Constitution (c) 1791. All Rights reserved.
> =============================================
>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>
>
>