[ICOM] Any Sherlock Holmes types available? Need part number .

[Simon Watt-Wyness]

Hi, 
Have not seen the connector that you are using but you may want to google  mate-n-lock. I have used these on the power connectors for my 706MKIIs.

Cheers,

Simon
ZL1SWW

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On Behalf Of Mike - KD9KC
Sent: Tuesday, 24 April 2007 1:03 p.m.
To: Mike - KD9KC
Subject: [ICOM] Any Sherlock Holmes types available? Need part number.


Good evening Folks.

I need a part number.  What I am searching for is the 2-pin connector that
goes on the back of the ICOM EX-767.  It is a 2-pin polarized MOLEX type
connector.  It is the mate to the OPC-225 power cable.

A useable substitute could be J-3 on the EX-766 Logic Unit A (power
connector), or J-4 thru 9 on the IC-900 Interface Unit B (Band unit power
connectors).  In the IC-900 manual I find it listed as part # LR-02-2V.

ICOM can't seem to come up with a cross to it.  If I do get something, I am
going to buy about 20 of them so I never need another.

While I am asking - anyone have any data either paper or PDF on the EX-767?

Thanks - y-all have a great evening...

Mike - KD9KC.
M.A.R.I.E.
El Paso, Tx. 
www.w5dpd.org

=============================================
The United States Constitution (c) 1791. All Rights reserved.
=============================================



----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/

===
www.eagle.co.nz

This email is confidential and may be legally privileged.
If received in error please destroy and immediately notify us.