[ICOM] Announcing a new Icom group, linked to the Icom Net

[Adam Farson]

Hi Larry,

Indeed...Icom are way ahead of the pack in IF-DSP design and implementation.

Cheers for now, 73,
Adam VA7OJ/AB4OJ

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of LARRY M WASSMAN
Sent: Sunday, April 22, 2007 18:44
To: ICOM Reflector
Subject: RE: [ICOM] Announcing a new Icom group, linked to the Icom Net

Adam if you are talking about that noise on 14.316 on the Icom net, the ANF
takes it out for me like gang busters. I have never in my 47 years in ham
radio ever seen a notch system anywhere near as good as what my 756 Pro III
or for that matter my 746 Pro have. Sure glad some great engineer was on the
ball. 73 LarryFrom The Real Wizard of OZ W3OZ

www.w3oz.com



> Date: Sun, 22 Apr 2007 17:51:12 -0700> From: farson at shaw.ca> Subject: 
> RE: [ICOM] Announcing a new Icom group, linked to the Icom Net> To: 
> icom at mailman.qth.net> > Hi Mac,> > The DSP-based manual notch in the 
> IC-746Pro, IC-756Pro series etc. will> completely take out the 
> strongest component in that mess. I can tune out the> worst part of 
> the interference using MN on my Pro3.> > Cheers for now, 73,> Adam 
> VA7OJ/AB4OJ>  > > -----Original Message-----> From: 
> icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On> 
> Behalf Of D C *Mac* Macdonald> Sent: Sunday, April 22, 2007 17:33> To: 
> icom at mailman.qth.net> Subject: RE: [ICOM] Announcing a new Icom group, 
> linked to the Icom Net> > I am using an IC-746.  The NR and ANF help a 
> little, but not sufficiently> with the signal levels these days.> The 
> crap is audible and strong over close to 3 kHz of the band!> > 73 - 
> Mac, K2GKK/5> Oklahoma City, OK> > > ----> Your Moderator: Dick 
> Flanagan K7VC, icom-owner at mailman.qth.net> Icom Users Net: Sundays, 
> 1700Z, 14.316 MHz> Icom FAQ: http://www.qsl.net/icom/----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/