[ICOM] Icom Tuning?...Help Please

[W. David Paperman]

Most (NOT ALL) ICOM encoders can be repaired for somewhat less than what 
  was quoted to you.

I have repaired a number of them and have test fixtures and parts on 
hand for several types.

Dave, W5WP



AD5VJ Bob wrote:

> I talked to Icom and they want 97 dollars plus some change for an encoder to an IC-775. Mine froze up and would not turn so I called
> them.
> 
> Does anyone know the Icom supplier of the encoder? 
> 
>   73 fer nw,
> Bob AD5VJ(AAR6VM)
> http://www.ad5vj.com/
> 
> Member CTDXCC
> 10X# 37210, FP#-1141
> SMIRK#-5177, RARS #-149
> 
> 
> 
>>-----Original Message-----
>>From: icom-bounces at mailman.qth.net 
>>[mailto:icom-bounces at mailman.qth.net] On Behalf Of Clif Holland
>>Sent: Wednesday, September 13, 2006 10:27 AM
>>To: ICOM Reflector
>>Subject: Re: [ICOM] Icom Tuning?...Help Please
>>
>>It's an encoder not a pot. The part is LA22401 with Icom's PN 
>>(old) of 91507109. My old parts list shows it to be alittle over $20.
>>
>>Clif Holland KA5IPF
>>www.avvid.com
>>
>>
>>
>>
>>----- Original Message -----
>>From: <Evans8119 at aol.com>
>>To: <icom at mailman.qth.net>
>>Sent: Wednesday, September 13, 2006 3:11 AM
>>Subject: [ICOM] Icom Tuning?...Help Please
>>
>>
>>
>>>Hi Larry,
>>>Well,it looks like a potentiometer to me but I'm not so sure now.
>>>I don't have a scope to test the knob either...is there 
>>
>>another way to 
>>
>>>test
>>>it.
>>>Oh,and the knob(Potentiometer?)is completely out of the 
>>
>>circuit now as 
>>
>>>well.
>>>
>>>Do you think there could be some other reason why turning 
>>
>>the knob wont
>>
>>>change frequencies?
>>>I did notice that if I turned the knob real fast I could 
>>
>>get a 5-10 KHz
>>
>>>change on the display but that's it.
>>>
>>>I would really love to get this rig going,so I would be 
>>
>>very grateful for
>>
>>>any help I can get on this
>>>
>>>Thank you
>>>----
>>>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>>>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>Icom FAQ: http://www.qsl.net/icom/
>>>
>>>
>>
>>
>>----
>>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>Icom FAQ: http://www.qsl.net/icom/
>>
> 
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 
> 
>