[ICOM] USB > serial HELP NEEDED for 2720 T81 others

[LARRY M WASSMAN]

I use KEYSPAN converters to connect to my PROIII. Work very well never a 
problem of any kind. Just plug them in and they will assign virtual comm 
ports for you. 73 Larry



>From The Real Wizard of OZ W3OZ
www.w3oz.com

This electronic message is from Larry M. Wassman It may contain confidential 
or privileged information. The information above can not be resent, copied 
or duplicated.  It is for you personal use only.  If you received this 
transmission in error, please reply to the sender to advice of the error and 
delete this transmission and any attachments.





From: Mike <nf4l at nf4l.com>
Reply-To: ICOM Reflector <icom at mailman.qth.net>
To: ICOM Reflector <icom at mailman.qth.net>
Subject: Re: [ICOM] USB > serial  HELP NEEDED for 2720 T81 others
Date: Tue, 05 Sep 2006 19:14:16 -0400

k0sd at juno.com wrote:
>Hello all,
>    I'm in the process of upgrading to a new laptop, my old one is dying.  
>My new one has no RS232 DB9 port, but all my Icom programming cables are
>DB9.  I've seen discussion previously on USB > RS232 converters.   Some
>are major problems, may work with one radio, not another, some work
>almost flawlessly.   Currently, what is a good one or ones to look for? 
>Thank you.
>Stephen, K0SD in FL
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>
>
Stephen
I get my cables from Dennis at http://www.hosenose.com/interfaces.asp. They 
don't work with my Rascal interface for FSK TTY, but do control the 756 
ProII, and the rotor.
73,
Mike NF4L (up the road in Jax)
----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/