[ICOM] wanted IC-745 parts radio

[Edward Dickinson, III]

Thanks. 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Fern Rivard
Sent: Tuesday, October 17, 2006 2:07 PM
To: ICOM Reflector
Subject: Re: [ICOM] wanted IC-745 parts radio

Ok Dick, will do.   Fern



----- Original Message -----
From: "Edward Dickinson, III" <softblue at alltel.net>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Tuesday, October 17, 2006 9:57 AM
Subject: RE: [ICOM] wanted IC-745 parts radio


> If you find an IC-745 parts radio, I need a knob & skirt for my 
> IC-740.  On
> the IC-740 the knob is used for Keyer/VOX Gain, VOX Delay, NB Switch, 
> NB
> Gain, or AGC.  It is similar on the IC-745.  Heck, I could get by with 
> just
> the skirt.
>
> Good luck,
> Dick - KA5KKT
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net 
> [mailto:icom-bounces at mailman.qth.net] On
> Behalf Of Fern Rivard
> Sent: Tuesday, October 17, 2006 10:02 AM
> To: icomreflector
> Subject: [ICOM] wanted IC-745 parts radio
>
> Looking for an Icom IC-745 parts radio which has a working logic board 
> as
> this is all that I need to repair mine with. Shipping would be to zip
> 83826 in northern Idaho.
> Thanks from Fern
>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom 
> Users
> Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.408 / Virus Database: 268.13.4/477 - Release Date: 
> 10/16/2006
>
> 

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/