[ICOM] FW: [IC-775DSP] Split operation no audio

[Vladimir V. Sidorov]

No problem, Bob, just enjoy the fine radio. And the group...   :-)

73,

Vladimir VE3IAE

---






> Please read my apology and retract concerning the IC-775 group below.
>
>  73 fer nw es gud DX,
> Bob AD5VJ(AAR6VM)
> http://www.ad5vj.com/
>
> Member: CTDXCC, NTCC
> FISTS: # 12637
> 10X# 37210, FP#-1141
> SMIRK#-5177, RARS #-149
>
>
>
>
> -----Original Message-----
> From: AD5VJ Bob [mailto:rtnmi at sbcglobal.net]
> Sent: Monday, October 16, 2006 2:35 PM
> To: 'IC-775DSP at yahoogroups.com'
> Subject: RE: [IC-775DSP] Split operation no audio
>
> Hi Vlad:
>
> You are right and I stand corrected. I will send this to the other group 
> as well.
>
> Thanks for the reply. Its been a while since I sent anything to this list 
> because the radio has been working so flawlessly.
>
> But now that you mention it this group has done me and others a great 
> service.
>
> My apologies to all.
>
>  73 fer nw es gud DX,
> Bob AD5VJ(AAR6VM)
> http://www.ad5vj.com/
>
> Member: CTDXCC, NTCC
> FISTS: # 12637
> 10X# 37210, FP#-1141
> SMIRK#-5177, RARS #-149
>
>
>
>
>> -----Original Message-----
>> From: IC-775DSP at yahoogroups.com
>> [mailto:IC-775DSP at yahoogroups.com] On Behalf Of Vladimir V. Sidorov
>> Sent: Monday, October 16, 2006 10:06 AM
>> To: IC-775DSP at yahoogroups.com
>> Subject: Re: [IC-775DSP] Split operation no audio
>>
>>
>> Bob,
>>
>> If my memory serves, you used to ask quite a lot of questions and I do
>> remember numerous answers to them in the IC-775 list.
>>
>> Then, please allow people some time to read your request. You have
>> posted it in the 775 list and very soon you were at the IcomRadio list
>> complaining on no reply.
>>
>> And finally. The scenatio you describe looks quite realistic, although
>> I have never noticed anything like that. The 10 m band is large enough
>> and most probably it is indeed divided into portions. Still, there is
>> a very simple solution to overcome eventual conflicts with VFO-1 in
>> one frequency block and VFO-2 in another. Just make it like this:
>> RX 28495
>> TX 28499.9 or so.
>> And you are done.
>>
>> 73,
>> Vladimir VE3IAE
>>
>> ---
>>
>>
>>
>> >I have an IC-775 and have had for some time now, and it works fine
>> >except I just noticed when trying to work the ZL8R that when
>> I go  into
>> >"split" for RX 28495 TX 28500
>> >
>> > The audio cuts almost all the way off.
>> >
>> > Is the point of 28500 considered a separate band and therefore you
>> > cant do split or is there something else.
>> >
>> > I have it in "Dualwatch" and it is fine, but the moment I go into
>> > "Dualwatch" and "split" the audio cuts out as though it is not
>> > receiving anything.
>> >
>> > No other bands do this.
>> >
>> >  73 fer nw es gud DX,
>> > Bob AD5VJ(AAR6VM)
>> > http://www.ad5vj.com/
>> >
>> > Member: CTDXCC, NTCC
>> > FISTS: # 12637
>> > 10X# 37210, FP#-1141
>> > SMIRK#-5177, RARS #-149
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> > Yahoo! Groups Links
>> >
>> >
>> >
>> >
>> >
>>
>>
>>
>>
>> Yahoo! Groups Links
>>
>> <*> To visit your group on the web, go to:
>>     http://groups.yahoo.com/group/IC-775DSP/
>>
>> <*> Your email settings:
>>     Individual Email | Traditional
>>
>> <*> To change settings online go to:
>>     http://groups.yahoo.com/group/IC-775DSP/join
>>     (Yahoo! ID required)
>>
>> <*> To change settings via email:
>>     mailto:IC-775DSP-digest at yahoogroups.com
>>     mailto:IC-775DSP-fullfeatured at yahoogroups.com
>>
>> <*> To unsubscribe from this group, send an email to:
>>     IC-775DSP-unsubscribe at yahoogroups.com
>>
>> <*> Your use of Yahoo! Groups is subject to:
>>     http://docs.yahoo.com/info/terms/
>>
>>
>>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>