FW: [ICOM] IC-746 no TX/RX on HF bands

[Bert Almemo]

No. I have checked the support and archives on the ICOM website but didn't
find any related issues. Maybe a phone call would be in order. Thanks.

73 Bert, VE3OBU
 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of we1x at comcast.net
Sent: Sunday, October 01, 2006 3:31 PM
To: ICOM Reflector
Subject: Re: FW: [ICOM] IC-746 no TX/RX on HF bands

Have you contacted Icom?

-------------- Original message --------------
From: "Bert Almemo" <balmemo at sympatico.ca> 

> Hello again,
> 
> No replies so far. Would really appreciate some suggestions and ideas. 
> Thanks. 
> 
> 73 Bert, VE3OBU
> 
> 
> -----Original Message-----
> From: icom-bounces at mailman.qth.net 
> [mailto:icom-bounces at mailman.qth.net] On Behalf Of Bert Almemo
> Sent: Tuesday, September 26, 2006 12:32 AM
> To: Icom reflector
> Subject: [ICOM] IC-746 no TX/RX on HF bands
> 
> I have acquired a "sick" 746, not pro, that has no power out and no 
> receive signal on all HF bands. I want to fix it but don't know where 
> to start. It works fine on 2 meters.
> 
> According to previous owner the IC151 and some discret components has 
> been replaced twice but the problem still remains. I've heard about 
> the problem with IC151 before but there has to be other components 
> involved with this problem. Would appreciate your suggestions and
comments. Thanks.
> 
> 73 Bert, VE3OBU
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom 
> Users
> Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom 
> Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: 
> http://www.qsl.net/icom/
----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/