[ICOM] 751 / FL44a filter question

[Edward Dickinson, III]

What bandwidth of the FL-30?

Dick - KA5KKT 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of KI9A at aol.com
Sent: Friday, November 17, 2006 6:31 AM
To: icom at mailman.qth.net
Subject: Re: [ICOM] 751 / FL44a filter question

 
In a message dated 11/16/2006 10:44:45 P.M. Central Standard Time,
gfiber at clearwire.net writes:

just  downloaded the IC-751 instruction manual form Icom Japan and the
455  KHz  FL-44A Filter was not an option but original equipment in the
IC-751 radio.
The FL30 was the 9 MHz SSB filter. Both were included as  purchased..

The manual shows only the FL52A and FL53A as the only 455  KHz option
filters. Those were 500 Hz and 250 Hz CW filters  respectively.
There are several 9 MHz filters that were optional
FL32  and FL63 the 500 and 250 MHz CW filters, FL33 AM filter and the FL70
2.8  KHz wide SSB filter.

Gary K8IZ




Thanks guys!
 
73-Chuck
----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/