[ICOM] 751 / FL44a filter question

[Gary Fiber]

Chuck,

I just downloaded the IC-751 instruction manual form Icom Japan and the 
455 KHz  FL-44A Filter was not an option but original equipment in the 
IC-751 radio.
The FL30 was the 9 MHz SSB filter. Both were included as purchased..

The manual shows only the FL52A and FL53A as the only 455 KHz option 
filters. Those were 500 Hz and 250 Hz CW filters respectively.
There are several 9 MHz filters that were optional
FL32 and FL63 the 500 and 250 MHz CW filters, FL33 AM filter and the 
FL70 2.8 KHz wide SSB filter.

Gary K8IZ

KI9A at aol.com wrote:
> Guys,
>  
> I am pulling a couple filters from my 751, and one is the 455kz/2.4 FL-44a.  
> I noticed when installing it, there must have been a couple of resistors that  
> were removed, i have no schematics, can anyone tell me what they were, so I  
> replace them after the filter is pulled?
>  
> Thanks!
>  
> 73-Chuck KI9A
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>
>
>