[ICOM] Need Schematic

[JMBlanco]

Hi Larry
Have also a IC-701, all schematics and colour board layouts (originals).
I can scan all you need up to 600 dpi resolution.
There seems that service manual has NOT been published for this rig.
73
Jose

----- Original Message ----- 
From: "Larry Kirkland" <lkirkland at sc.rr.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Saturday, November 04, 2006 3:50 PM
Subject: [ICOM] Need Schematic


> I am trying to salvage a nice clean (but old) IC-701 transceiver.  It
> has problems related to the main tuning encoding system.  I suspect it
> has the famous "bad soldered eyelet" problem.  I have the operators
> manual, but the small inset schematic in that book does not agree with
> what I am observing on the circuit board.
> Can someone point me to a full schematic or service manual for this radio?
>
> Thanks & 73's;
> Larry W4LK
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/