[-] Re: [ICOM] Icom 775DSP Reg Unit K.O

[Paul Playford]

I have a .PDF schematic of the Rubycon power supply and can email it to you 
direct.

It's about 1/2 MB in size.

de Paul, W8AEF


----- Original Message ----- 
From: "Jim M." <jmiller1706 at cfl.rr.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Saturday, November 04, 2006 6:56 AM
Subject: [-] Re: [ICOM] Icom 775DSP Reg Unit K.O


> Joel
> I find no internal schematic for the regulator in the 775DSP service 
> manual. The diagrom shows only a box called "Reg Unit" with aPower Board" 
> and a "PA Unit" inside.  The Power Board takes AC mains in (120 VAC) and 
> has output for 14V and 28V, and the fan.  I find no schematic for Power 
> Board.  There is a 120 VAC version and a 240 VAC version.
> Jim N4BE
>
> ----- Original Message ----- 
> From: "Erpelding joeljoeljoe" <lx1er at pt.lu>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Saturday, November 04, 2006 4:54 AM
> Subject: [ICOM] Icom 775DSP Reg Unit K.O
>
>
>> hi all i sent again this mail , because had some problems on pc and do 
>> not know if someone send a answer to me . so here again my problem :