[ICOM] Icom 756 PRO PARTS

[AD5VJ Bob]

The shipping costs more than the foot so I thought I would try the reflector first :0)

  73 fer nw,
Bob AD5VJ(AAR6VM)
Visit My Ham Blog
http://www.ad5vj.com/

10X# 37210, FP#-1141, SMIRK#-5177
Code may be taking a back seat for now,
but the pioneering spirit that put the code
there in the first place is out front of it all.


 

> -----Original Message-----
> From: icom-bounces at mailman.qth.net 
> [mailto:icom-bounces at mailman.qth.net] On Behalf Of B Riches
> Sent: Saturday, May 20, 2006 7:10 AM
> To: ICOM Reflector
> Subject: Re: [ICOM] Icom 756 PRO PARTS
> 
> Why not contact ICOM?
> 
> 73,
> 
> Bill, WA2DVU
> ----- Original Message -----
> From: "AD5VJ Bob" <rtnmi at sbcglobal.net>
> To: "Icom Reflector" <icom at mailman.qth.net>
> Sent: Friday, May 19, 2006 9:20 PM
> Subject: [ICOM] Icom 756 PRO PARTS
> 
> 
> >I am in need of the foot that goes in the front of an icom 
> 756PRO. The one 
> >that flips out so the rig sets up at an angle.
> >
> > The Icom Part numbers as I understand it are:
> >
> > 8930041351 - "Main Stand-1" this is the piece that is 
> attached to the 
> > bottom cover with a screw.
> >
> > 8930041341 - "Sub Stand-1" - this is the part that flips up 
> and down.
> >
> >
> >
> >  73 fer nw,
> > Bob AD5VJ(AAR6VM)
> > Visit My Ham Blog
> > http://www.ad5vj.com/
> >
> > 10X# 37210, FP#-1141, SMIRK#-5177
> > Code may be taking a back seat for now,
> > but the pioneering spirit that put the code
> > there in the first place is out front of it all.
> >
> >
> >
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > 
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>