[ICOM] Icom 502-A

[Bruce Crow]

Thanks !

I will start sifting around for AOR scanner accessories.
Bruce
KI4HHK
----- Original Message ----- 
From: "John Geiger" <ne0p at lcisp.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Thursday, May 04, 2006 8:46 AM
Subject: Re: [ICOM] Icom 502-A


> I had this same problem with a Icom 505 a few years ago.  AOR scanners
have
> the same plug.  I bought the power cord from them, but it was wired
slightly
> differently than the Icom, so I did an internal modification to get the
Icom
> to work right with it.
>
> 73s John NE0P
>
> ----- Original Message -----
> From: "Bruce Crow" <ki4hhk at verizon.net>
> To: <icom at mailman.qth.net>
> Sent: Thursday, May 04, 2006 10:59 AM
> Subject: [ICOM] Icom 502-A
>
>
> > I have acquired a really nice, clean, working Icom IC-502A.
> > It has all the good things for operating .... except the DC power cord.
> > This is the one with the strange three pin female molded plug on the
end,
> > which kind of looks like a
> > triangle with the corners shaved off.  I have been told that Icom only
> used
> > these on the Icom "book shelf series".
> > Does anyone either know where or have a spare cord or else does anyone
> know
> > of a source for the cord
> > and/or connector?
> >
> > Thanks in advance for any help or leads.Bruce Crow
> > (KI4HHK at verizon.net
> >
> > ----
> > Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> >
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/