[ICOM] IC-746 Pro Rig Receive Antenna Input?

[Maciej Wieczorek]

Hi,

When I was running my old IC 736 I used ANT*2 input for receiving antenna 
system this way:

I built a small box with simple 12V relay, which was:
- disconnecting RX antenna system while transmitting
- connecting a dummy load while transmiting

And never had a problem.

73
SP2XF




----- Original Message ----- 
From: "Bob Garrett" <rgarrett at suscom.net>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Thursday, March 23, 2006 11:45 AM
Subject: Re: [ICOM] IC-746 Pro Rig Receive Antenna Input?


> Unfortunately, no it doesn't.  I purchased the KD9SV model SVDXII box to 
> accomplish this task, have the ability to switch four RX antennas, protect 
> the front end switch the amplifier, and give me a preamp on 160 and 80 
> meters.  With that addition, you are good to go.
>
> 73, Bob K3UL
> 73, Bob K3UL
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>