[ICOM] IC756 & digital modes

[Bill & Margaret Stevens]

Thanks for responding Frank.
Could you tell me how you added the extra gain?
So far what I had done was use my amp.
73's, Bill
----- Original Message ----- 
From: "Frank A. Ellis" <w3uhf at yahoo.com>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Saturday, March 11, 2006 4:02 PM
Subject: Re: [ICOM] IC756 & digital modes


> Bill,
> 
> The MOD IN via the rear connector bypasses the mic
> preamplifier that is available thru the front MIC
> connector. I had the same problem, and needed to add
> some extra gain to compensate for it when using MOD
> IN.
> 
> 73 Frank W3UHF
> 
> 
> 
> 
> --- Bill & Margaret Stevens <wmstevens at starband.net>
> wrote:
> 
> > Hello.
> > I recently hooked up my Buxcom interface to the
> > 8-pin din on the back of my IC756. The problem is I
> > can only get abt 4 watts out. Ive tried moving the
> > sliders on the sound card mixer every which way on
> > my pc. It works fine going through the front of the
> > rig at the mic connection. Anyone out there help me?
> > 73's, Bill/kl7ida
> > ----
> > Your Moderator: Dick Flanagan K7VC,
> > icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/