[ICOM] IC-746 tx power problem

[Bert Almemo]

Hi Paul,

Thanks for your reply. I have been to mods.dk and I found a couple of
articles about the tx problem. I'm just wondering if there is more to it or
if this is all you have to do to get rid of the problem?

The only answer I got was from you so I hope someone else is reading this
and might have some more comments. Thanks.

73 Bert, VE3OBU
 

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of Paul Playford
Sent: Tuesday, June 27, 2006 8:14 PM
To: ICOM Reflector
Subject: Re: [ICOM] IC-746 tx power problem

Yes.  This is a feature of 746, 756, etc radios.

www.mods.dk

But you have to log in to the site and I don't seem to be able to anymore.

de Paul, W8AEF

----- Original Message -----
From: "Bert Almemo" <balmemo at sympatico.ca>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Tuesday, June 27, 2006 3:16 PM
Subject: [ICOM] IC-746 tx power problem


> Hi guys,
>
> A friend of mine has a problem with his 746 - no power out on all bands.
> It's the infamous IC151 circuit that's failing.
>
> He's had the 746 to a local dealer who replaced the IC151 and a couple of
> diodes. It worked for a couple of hours and now he has the same problem
> again!!
>
> I don't know all the details related to this problem, but isn't there a 
> mod
> or two involved to fix this problem permanently?
>
> I would appreciate your comments. Thanks.
>
> 73 Bert, VE3OBU

----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/