[ICOM] IC-706MKIIG & CT-17

[John Fleming]

Alan, I agree that AUTO baud rate is probably your problem!  Let us 
now...  - John

----- Original Message ----- 
From: "N5PA" <n5pa at n5pa.com>
To: <icom at mailman.qth.net>
Sent: Monday, June 12, 2006 3:16 PM
Subject: [ICOM] IC-706MKIIG & CT-17


>I am trying to hook my IC-706MKIIG to DX4WIN and WriteLog via my CT-17
> computer interface.  I thought it would be straight forward.  I hooked the
> CT-17 to COM4, power to my power supply, and the single cable with the two
> 1/8 inch phono plugs to the CT-17 and the IC-706MKIIG.  The original hex
> address on the 706 was 58H and that did not work and then I changed it to
> 48H and that did not work, either.  I left the baud rate on the radio set 
> at
> AUTO.  This seems like a fairly straightforward installation and it does 
> not
> work.  Any help would be appreciated.
>
> 73,
> Alan, N5PA
>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>