[ICOM] IC-706MKIIG & CT-17

[N5PA]

I am trying to hook my IC-706MKIIG to DX4WIN and WriteLog via my CT-17
computer interface.  I thought it would be straight forward.  I hooked the
CT-17 to COM4, power to my power supply, and the single cable with the two
1/8 inch phono plugs to the CT-17 and the IC-706MKIIG.  The original hex
address on the 706 was 58H and that did not work and then I changed it to
48H and that did not work, either.  I left the baud rate on the radio set at
AUTO.  This seems like a fairly straightforward installation and it does not
work.  Any help would be appreciated.  

73,
Alan, N5PA