[ICOM] 706MKIIG No CW Output

[hamradioguy]

JV,

Thats my intent to try and help, thus my suggestion.

Another thought that crosses my mind, but I'm not sure if it's possible. Is it possible for the output to be turned down in the CW mode and not in SSB...anyone on the group know ??

Bert

On Sat, 10 Jun 2006 13:06:31 -0400 (Eastern Standard Time), "JV" <kt4u at adelphia.net> wrote:
> Bert
>     I was over there when you called. Fred was a little quick on the
> trigger
>  Output on CW is only a few milli watts and he did work some one. It does
> receive OK on SSB and CW. Nothing has changed on the radio since it was
> shipped. I am just trying to help him get the radio going. It works find
> in
> SSB and the SWR antenna settings are in the 1.2 : 1 range. Still looking
> for
> ideas.
> JV
> 
> -------Original Message-------
> 
> From: hamradioguy
> Date: 06/10/06 12:10:14
> To: ICOM Reflector
> Subject: Re: [ICOM] 706MKIIG No CW Output
> 
> JV,
> 
> When I talked with Fred about this the other day I suggested that it might
> be a problem with the outside meter/coax connections/antenna etc. in that
> the radio worked fine in all modes when I checked it out before shipping
> it.
> When I last talked to him on Friday he confirmed that I was right and that
> was the problem. He told me he could hear the signal in a receiver and
> that
> he had put it on the air and worked someone on CW. That would indicate you
> are now looking for something that has changed since then or reocurred.
> 
> 
> I'm wondering if there is still a problem that is swr related causing the
> rig to fold back it's output to protect it from a high SWR...
> 
> Bert W1DFU
> 
> On Sat, 10 Jun 2006 09:09:34 -0400 (Eastern Standard Time), "JV"
> <kt4u at adelphia.net> wrote:
>> Hi Guys
>> Need some advise. A friend purchased an used 706MKIIG that will not Tx
>> on CW. It has full output in SSB mode as displayed on the meter and
> audio
>> is
>> great but zero using CW. We though the meter was not picking up CW. I
> put
>> my
>> meter inline and it will make the needle wriggle showing less than a one
>> watt out. The radio is in CW mode, BK is on and the red Tx light comes
> on.
> 
>> Anyone have any ideas. He wanted to work CW in the six meter contest
> today
> 
>> if possible.
>> JV
>>
>>
>>
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> Enjoy a stay in Monaco with 3A2MD. She now has
>> Bed and Breakfast facilitates. Contact her via
>> e-mail for dates and prices. airaldilaura at libello.com
>> Her web site is http://3a2md.chez-Alice.fr/eng.htm
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> ----
>> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 
> 
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.8.3/360 - Release Date: 6/9/2006
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/