[ICOM] Dead 2720 check the gnd ??

[W. David Paperman]

Totally disconnect the power from the radio for app. 30 seconds Then 
reconnect and attempt to it turn back on.

Dave, W5WP

Bill NY9H wrote:
> since it's mounted it's 'probably' got a great ground...
> but I have lost a gnd in a car install before,,,, just an idea....
> 
> bill
> 
> At 11:40 PM 6/6/2006, you wrote:
> 
>> Hi guys,
>>
>> I got in my truck this morning and tried to fire up the 2720 and 
>> nothing. The rig will not turn on. I checked the power cable and have 
>> 12v into the rig and the cable from the main unit to the control head 
>> is secure on both ends. Any suggestions where to start looking for the 
>> problem?
>>
>> Bill...KC5GNB
>> ----
>> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 
> .
>