[ICOM] IC-775

[AD5VJ Bob]

No he seems to know if it is in the center then you get equal sound from both and if one side or the other then less (depending on
the side) but on the side that should be the subreceiver it is very low volume.

Now if he rotates the bal control quickly a few times it will clear up and then later comes back.

Im wondering if the pot could be dirty or can these be cleaned with contact cleaner?

Any strange materials in there that could be destroyed by contact cleaner??

  73 fer nw,
Bob AD5VJ(AAR6VM)
Visit My Ham Blog
http://www.ad5vj.com/

10X# 37210, FP#-1141, SMIRK#-5177
Code may be taking a back seat for now,
but the pioneering spirit that put the code
there in the first place is out front of it all.


 

> -----Original Message-----
> From: icom-bounces at mailman.qth.net 
> [mailto:icom-bounces at mailman.qth.net] On Behalf Of Jack Stout
> Sent: Tuesday, June 06, 2006 8:15 PM
> To: icom at mailman.qth.net
> Subject: RE: [ICOM] IC-775
> 
> Is he perhaps talking about the balance control not being 
> centered and therefore less rx audio?
> Just a thought
> 
> Jack
> 
> 
> >From: "AD5VJ  Bob" <rtnmi at sbcglobal.net>
> >Reply-To: ICOM Reflector <icom at mailman.qth.net>
> >To: "Icom Reflector" <icom at mailman.qth.net>
> >Subject: [ICOM] IC-775
> >Date: Tue, 6 Jun 2006 18:27:05 -0500
> >
> >Ok
> >
> >The guy who I am dealing with on the IC-775 just telephoned 
> me to say 
> >that he just noticed that he thoroughly checked out the rig before 
> >sending it and it seems to have a slight problem:
> >
> >Under normal receiving it is just fine, in split it is just fine, 
> >however, when you go to dual watch for some reason it seems to be 
> >receiving but is receiving very very low.
> >
> >Told him I would check with you guys.
> >Any ideas? Anyone heard of this before?
> >
> >
> >   73 fer nw,
> >Bob AD5VJ(AAR6VM)
> >Visit My Ham Blog
> >http://www.ad5vj.com/
> >
> >10X# 37210, FP#-1141, SMIRK#-5177
> >Code may be taking a back seat for now, but the pioneering 
> spirit that 
> >put the code there in the first place is out front of it all.
> >
> >
> >
> >
> >----
> >Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom 
> >Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: 
> >http://www.qsl.net/icom/
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC, 
> icom-owner at mailman.qth.net Icom Users Net: Sundays, 1700Z, 
> 14.316 MHz Icom FAQ: http://www.qsl.net/icom/
>