[ICOM] G5RV & AT-500

[Paul Gates, KD3JF]

I have a W5GI G5RV and work all bands.... 30 meters is fine with the tuner of mine of course. Worked some good CW on 30 meters.
 
Paul, KD3JF
Glen Burnie, MD
FM19qd (Map Grid Square)


----- Original Message ----
From: Clif Holland <radio.service at verizon.net>
To: ICOM Reflector <icom at mailman.qth.net>
Sent: Tuesday, June 6, 2006 8:53:44 PM
Subject: Re: [ICOM] G5RV & AT-500


Where is the problem?
The first email says 34, 40, & 80. The second says 15 & 10.
All the literature I've seen on the G5RV says it will not work on 30 BUT the 
only one I've had tuned fine with a TS440SAT.

Clif Holland KA5IPF
www.avvid.com


----- Original Message ----- 
From: "Alan Leith" <aleith at syd.eastlink.ca>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Tuesday, June 06, 2006 7:24 PM
Subject: Re: [ICOM] G5RV & AT-500


> No, the antenna is now functioning almost perfectly -- just can't seem to 
> get it into range of 2:1 on 15 and 10.  It is loading fine on all the 
> other bands.
>
> 73
>
> Al, VE1AL
> ______________
>
> At 08:06 PM 6/6/2006, you wrote:
>
>>Hi. Had a similar problem. One lead of the ladder line was broken at the
>>top. You could not see the break from the ground. Had to lower the antenna 
>>a
>>found the break.
>>Mike, K6STU
>>----
>>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>Icom FAQ: http://www.qsl.net/icom/
>>
>>
>>
>>--
>>No virus found in this incoming message.
>>Checked by AVG Anti-Virus.
>>Version: 7.1.385 / Virus Database: 268.8.1/355 - Release Date: 6/2/2006
>
>
> -- 
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.1.385 / Virus Database: 268.8.1/355 - Release Date: 6/2/2006
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 


----
Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/