[ICOM] IC-775

[Jan Robbins]

I have never encountered such a problem, UNLESS what he's talking about 
is dualwatch on another band.  It is true that you can't do dualwatch on 
two different bands with same results (two vfo's does not mean, as with 
the 7800, two SEPARATE receivers), because of filtering.  Dualwatch on 
20m should produce the same signal strength as 20m main band, but if 
dualwatch is on 40 and main is on 20, that won't be the case.  Jan

AD5VJ Bob wrote:

>Ok 
>
>The guy who I am dealing with on the IC-775 just telephoned me to say that he just noticed that he thoroughly checked out the rig
>before sending it and it seems to have a slight problem:
>
>Under normal receiving it is just fine, in split it is just fine, however, when you go to dual watch for some reason it seems to be
>receiving but is receiving very very low.
>
>Told him I would check with you guys.
>Any ideas? Anyone heard of this before?
>
>
>  73 fer nw,
>Bob AD5VJ(AAR6VM)
>Visit My Ham Blog
>http://www.ad5vj.com/
>
>10X# 37210, FP#-1141, SMIRK#-5177
>Code may be taking a back seat for now,
>but the pioneering spirit that put the code
>there in the first place is out front of it all.
>
>
>
>
>----
>Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>
>
>  
>