[ICOM] Mic gain on the 706 MKIIG

Fern Rivard crc at cyberlink.bc.ca
Thu Jun 1 00:50:24 EDT 2006


    You should make sure that you have the SPEECH PROCESSOR is turned 
OFF when using that rig in the FM mode or the transmit audio will sound 
like it is overdeviating.  This is what I observed  when looking at the 
transmit audio on a service monitor.
    Fern  VE7GZ




----- Original Message ----- 
From: "W7RY" <w7ry at centurytel.net>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Wednesday, May 31, 2006 10:14 PM
Subject: RE: [ICOM] Mic gain on the 706 MKIIG


> Agreed! I have found the same.
>
> 73
> Jim W7RY
>
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net 
> [mailto:icom-bounces at mailman.qth.net]
> On Behalf Of Jay
> Sent: Wednesday, May 31, 2006 8:24 PM
> To: 'ICOM Reflector'
> Subject: RE: [ICOM] Mic gain on the 706 MKIIG
>
> Whether the mic gain control has any affect or not, my personal
> experience
> (three newby Techs who bought 706's because of the "all rigs in one 
> box"
> factor) ALL had to be told to back off the mic on the 2m repeaters.
>
> All were using stock mics, and all were excessively overdeviating 
> unless
> they held the mic about a foot away.
>
> Jay
> AD5PE
>
> -----Original Message-----
> From: icom-bounces at mailman.qth.net 
> [mailto:icom-bounces at mailman.qth.net]
> On
> Behalf Of Clif Holland
> Sent: Wednesday, May 31, 2006 11:25
> To: ICOM Reflector
> Subject: Re: [ICOM] Mic gain on the 706 MKIIG
>
> Since I was not "absolutely" sure I checked the SM and the 706 MKIIG
> sitting
> on my bench before posting.
>
> Try it, go to mike gain setting while on a 2m repeater. Turn it up and
> down
> and see what happens.
>
> Clif Holland KA5IPF
> www.avvid.com
>
>
> ----- Original Message -----
> From: "ed yeary" <w4tey at bellsouth.net>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Wednesday, May 31, 2006 10:25 AM
> Subject: Re: [ICOM] Mic gain on the 706 MKIIG
>
>
>> Are you sure about this?
>> Ed Yeary W4TEY
>> ----- Original Message ----- 
>> From: "Clif Holland" <radio.service at verizon.net>
>> To: "ICOM Reflector" <icom at mailman.qth.net>
>> Sent: Wednesday, May 31, 2006 11:24 AM
>> Subject: Re: [ICOM] Mic gain on the 706 MKIIG
>>
>>
>>> The mike gain setting has nothing to do with FM deviation. Deviation
> is
>>> set by an internal pot. The front panel Mike Gain setting is for 
>>> SSB.
>>>
>>> Clif Holland KA5IPF
>>> www.avvid.com
>>>
>>>
>>> ----- Original Message ----- 
>>> From: "John Luthy" <jluthy at worldnet.att.net>
>>> To: "ICOM Reflector" <icom at mailman.qth.net>
>>> Sent: Wednesday, May 31, 2006 9:18 AM
>>> Subject: Re: [ICOM] Mic gain on the 706 MKIIG
>>>
>>>
>>>> Jack
>>>>
>>>> I also have this issue with my 706.   I think I have my gain set to
> 3
>>>> and I yell at it on SSB and hold the mic about a foot away on FM.
>>>>
>>>> There must be some way to set things so this dosent happen.  What
>>>> makes it worse is My kenwood d700. I always have to yell at that
> thing
>>>> so I find my self over driving my 706 on FM.  just 'cause I'm
> trained
>>>> to.
>>>>
>>>> N7JL
>>>> John
>>>>
>>>>
>>>> ----- Original Message ----- 
>>>> From: "Jack - K4WSB" <K4WSB at arrl.net>
>>>> To: "ICOM Reflector" <icom at mailman.qth.net>
>>>> Sent: Wednesday, May 31, 2006 3:52 AM
>>>> Subject: [ICOM] Mic gain on the 706 MKIIG
>>>>
>>>>
>>>>> Am I missing something?  Every time I switch between FM & SSB I
> have
>>>> to
>>>>> reset the mic gain.  I understand this is also a problem with the
>>>> 910h also.
>>>>> This is most inconvenient, especially mobile.
>>>>>
>>>>> Is there a fix?
>>>>>
>>>>> Does the 7000 have the same problem?
>>>>>
>>>>>
>>>>> Jack Hartley
>>>>> K4WSB
>>>>> ARRL - QCWA - OOTC
>>>>> DXCC Honor Roll
>>>>>
>>>>> ----
>>>>> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>>>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>>> Icom FAQ: http://www.qsl.net/icom/
>>>>
>>>> ----
>>>> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>> Icom FAQ: http://www.qsl.net/icom/
>>>>
>>>
>>>
>>> ----
>>> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>>
>>>
>>> -- 
>>> No virus found in this incoming message.
>>> Checked by AVG Free Edition.
>>> Version: 7.0.394 / Virus Database: 268.8.0/352 - Release Date:
> 5/30/2006
>>>
>>>
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.7.4/351 - Release Date: 
> 5/29/2006
>
> 



More information about the Icom mailing list