[ICOM] IC-551 Jumper

[crawfish]

Thank you, Osamu san!! I appreciate it.
                                        Joe W4AAB
----- Original Message -----
From: "Osamu Hazawa" <pomerol at mocha.ocn.ne.jp>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Friday, July 28, 2006 7:11 PM
Subject: Re: [ICOM] IC-551 Jumper


> Joe,
>
> Right 2 pins out of 4, facing the back pane in front of you, should be
> shorted.
> "Right" means "arrow" shaped side.
>  Tell me if you are not sure. I'll send a stock short connector's pics.
>
>
> Osamu Hazawa
>
> ----- Original Message -----
> From: "crawfish" <crawfish at surfmore.net>
> To: "ICOM Reflector" <icom at mailman.qth.net>
> Sent: Saturday, July 29, 2006 8:44 AM
> Subject: [ICOM] IC-551 Jumper
>
>
> I am trying to remember the two pins that have to be jumpered for
operation
> of the IC-551 on AC. I believe it is the same as the IC-251-A but I forgot
> it. Trying to help someone else out.
>                                  Joe W4AAB
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>