[ICOM] 756 Pro III Problem

[Geer Krul]

Or the IC-PS 30 System power supply.
Gerry ve6wg
----- Original Message ----- 
From: "Adam Farson" <farson at shaw.ca>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Monday, July 03, 2006 6:55 PM
Subject: RE: [ICOM] 756 Pro III Problem


> Hi Paul,
>
> Right. The PSU should be rated at 13.8V, minimum 25A continuous. A 30A 
> power
> supply is better. I find that either the IC-PS15 or the IC-PS125 will do
> fine at 100W CW output.
>
> A PSU which is "short of breath" will sag at full load, causing the 
> symptoms
> Bob described.
>
> Cheers for now, 73,
> Adam VA7OJ/AB4OJ
>
>
>
> Scanned for viruses by Blue Coat
> http://www.WinProxy.com/
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>