[ICOM] Re: IC-228 lighting problem

[David S. McCallum]

Hi Mac, well I don't have a service manual and when I try to down load it
says it is corrupt and won't open it, I think we discussed this awhile
back. So my buddy and I disassembled the front panel and all the bulbs
appear to check ok but won't light up (panel back ground lights). And
we're trying to find a schematic so we can check further....Mac #2. 
 
On Sun, 29 Jan 2006 01:40:09 GMT "D C (Mac) Macdonald" <k2gkk at juno.com>
writes:
> What's your lighting problem?  I replaced
> the dead lamps in my 228A and 228H with
> grain-of-wheat lamps from Radio Shack.
> 
> Not terribly hard if you have the service
> manual and not very expensive either.  Not
> worth the time and effort for me to go LED.
> 
> 73  ---  Mac, K2GKK/5
> 
> 
> 
> -- "David S. McCallum" <w7sac at juno.com> wrote:
> To: icom at mailman.qth.net
> Date: Sat, 28 Jan 2006 16:38:22 -0600
> Subject: Re: [ICOM] Schematic and board layout for HM-14 needed
> From: "David S. McCallum" <w7sac at juno.com>
> 
> Hey Mac I'm still trying to find one for my lighting
> problem on my -228H.....Any ideas????, Mac (another one)
> 
> 
> On Sat, 28 Jan 2006 14:08:31 GMT "D C (Mac) Macdonald" 
> <k2gkk at juno.com>
> writes:
> > Can anybody steer me to where I might be able
> > to find a schematic and circuit board layout
> > for the HM-14 DTMF microphone?  It was an
> > option for IC-28A/H and perhaps IC-228A/H
> > radios?
> > 
> > Thanks in advance for any guidance.
> > 
> > 73  ---  Mac, K2GKK/5
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 
> 


David S. McCallum/USAF RET./CMSGT/W7SAC/4