[ICOM] IC-551 DC Connector

[Osamu Hazawa]

Hi Julio

Thanks for the information.

It is an in-line 4 pin connector and the shape is like an
arrow (one side is triangular shape in order to avoid
miss-connection). It should be attached to the 13.8V
DC connector on the back of the rig.

It is approximately 3/8 inch by 1 cnch.

Thanks in advance.

Osamu Hazawa
http://www4.ocn.ne.jp/~pomerol/MyPage/menu4.html

----- Original Message ----- 
From: "Julio Peralta" <jperalta at tampabay.rr.com>
To: "'ICOM Reflector'" <icom at mailman.qth.net>
Sent: Sunday, January 29, 2006 11:51 AM
Subject: RE: [ICOM] IC-551 DC Connector


> Can you describe what the plug should look like?  I have a plug left
> over from a 551 however it may have been from the installation of the FM
> unit or the passband accessory.
> 
> Julio, W4HY
> 
> -----Original Message-----
> From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net]
> On Behalf Of Osamu Hazawa
> Sent: Saturday, January 28, 2006 8:01 PM
> To: icom at mailman.qth.net
> Subject: [ICOM] IC-551 DC Connector
> 
> 
> Hello All,
> 
> I've just a fair condition IC-551.
> But it is missing a DC "shorting" connector for supplying regurated
> power to the circuits so I cannot even power it 
> up with AC.
> Both the user's manual and the service manual don't mention
> it (the service manual does have the schematics though).
> 
> Could anyone tell me how to short the pins out?
> 
> Osamu Hazawa
> http://www4.ocn.ne.jp/~pomerol/MyPage/menu4.html
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net Icom
> Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> 
>