[ICOM] IC 746 [NOT PRO]

[John Geiger]

Hi Bob,

Yes you have to remove the whole cover.  Too bad they don't have the little
trap door in the bottom like Kenwood does.  You don't actually have to
remove the top cover to get the bottom one off.  Just take the screws on the
sides of the radio off, and it will allow you to get the bottom cover off
then.

73s John NE0P

----- Original Message -----
From: <Greenacres113 at aol.com>
To: <icom at mailman.qth.net>
Sent: Saturday, January 28, 2006 1:22 AM
Subject: [ICOM] IC 746 [NOT PRO]


> I JUST PURCHASED AN ICOM 746. I HAVE ORDERED AN FL 100 CW  FILTER. THE
MANUAL
> SAYS REMOVE THE BOTTOM COVER TO INSTALL. REMOVE THE 6 SCREWS  AS IN PIX
TWO
> PAGES BACK. THE PIX SAYS TO REMOVE THE TOP COVER TO REMOVE  THE  BOTTOM
COVER
> I THINK. IT'S NOT CLEAR TO ME. DO I JUST REMOVE THE 6  BOTTOM SCREWS FOR
> ACCESS TO THE FILTER SLOTS OR DOES EVERYTHING COME OFF? I'M  SURE THERE
ARE GUYS
> WHO HAVE INSTALLED FILTERS IN THE 746. PLEASE TELL ME HOW  YOU DO IT.
>
> TNX  BOB K9IL
> ----
> Your Moderator: Dick Flanagan K7VC, icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
>